PRODUCT
HOME | PRODUCT | Amplifier | MP SERIES | MPD 2000
MPD 2000
1
2
  • full mosfet class D power amplifier
  • 2 input / mono channel input
  • low current consumption
  • low heat generation (performance more than 85%)
  • fully 1 ohm stable operation
  • two speakers operation
  • RCA line out
  • crossover slope (24dB per Oct)
  • super bass control : 0-12db
  • variable subsonic flter (15Hz-40Hz)
  • variable low pass filter (40Hz-250Hz, 24dB per Oct)
  • wired remote control (optional 5 meter volume wire)
  • thermal, overload, short circuit and dc off-set protection
  • transparent power and speakers terminal

Technical Specification

4 ohms maximum output @0.03% THD 3000Watts
4ohms bridged mono output @0.02% THD ----
2 ohms WRMS output @0.1 THD 1 x 3000W
Low pass filter 40Hz - 250Hz
Subsonic Filter 15Hz - 40KHz
Frequency response 20 - 20KHz
Signal to noise ratio 100dB
Stereo separation >55dB
Input sensitivity 100mV - 2.0V
Input impedance 10 Kohms
Operation voltage DC 12V
Speaker impedance @ stereo driven 1 Ohms
Fuse rating 30Ax3
Dimension (WHD) mm 380x53x250