PRODUCT
HOME | PRODUCT | Amplifier | XP SERIES | XP 800D
XP 800D
1
  • Ultra stable pwm (pulse width modulated) mosfet power supply
  • 2 ohm stable operation with output power increase
  • built-in crossover top control
    ch ½ : variable hi-pass filter (40hz-1khz)
    ch ¾ : variable hi-pass filter (40hz-1khz)
    variable low-pass filter (40hz-250hz)
  • tri-mode capability for simultaneous hook-up of two stereo channels and subwoofer
  • super bass control : 0-12db
  • soft-start delay turn-on circuit
  • automatic remote on/off switching
  • power on and protect led indicators
  • bult-in overload protection circuit
  • bult-in over current protection circuit
  • bult-in overheat protection circuit
  • gold plated rca input and transparent terminals
  • line out rca jack

Technical Specification

Maximum output 800Watts
4 ohms maximum output @0.03% THD 800W RMS/1 ohm
4 ohms bridged mono output @0.02% THD 400W RMS/2 ohm
2 ohms WRMS output @0.1 THD 200W RMS/4 ohm
Low pass filter 40Hz - 250Hz
High pass filter 15Hz - 40Hz/Subsonic
Frequency response 20 - 20KHz
Signal to noise ratio 100dB
Stereo separation >55dB
Input sensitivity 100mV - 2.0V
Input impedance 10 Kohms
Operation voltage (negative ground) DC 14.4V
Speaker impedance @ stereo driven 1ohm
Fuse rating 25Ax3
Dimension (WxHxL) mm 320 x 50 x 264