PRODUCT
HOME | PRODUCT | Amplifier | ZD SERIES | ZD 2400
ZD 2400
1
  • full mosfet class D power amplifier
  • 2 input / mono channel input
  • low current consumption
  • low heat generation (performance more than 85%)
  • fully 1 ohm stable operation
  • two speakers operation
  • RCA line out and input jack
  • crossover slope (24dB per Oct)
  • super bass control : 0-12db
  • variable subsonic flter (15Hz-40Hz)
  • variable low pass filter (40Hz-250Hz, 24dB per Oct)
  • wired remote control (optional 5 meter volume wire)
  • thermal, overload, short circuit and dc off-set protection
  • transparent power and speakers terminal

Technical Specification

4 ohms maximum output @0.03% THD 2400W RMS/1 ohm
4 ohms bridged mono output @0.02% THD 1700W RMS/2 ohms
2 ohms WRMS output @0.1 THD 1000W RMS/4 ohms
Low pass filter 40Hz - 250Hz
Subsonic Filter 15Hz-40Hz/Subsonic
Frequency response 20 - 500Hz
Signal to noise ratio 100dB
Stereo separation ----
Input sensitivity 150mV - 2.5V
Input impedance 10Kohms
Operation voltage DC 12.4V
Speaker impedance @ stereo driven 1 Ohm
Remote Control Optional
Fuse rating 30Ax3
Dimension (WHD) mm 420x50x244