PLATINUM SERIES

AVAILABLE TYPE

PL 1600

Spesifications

* 4Ohms Maximum Output @0.03% THD : 800W

* 4 Ohms Bridged Mono Output @0.02% THD : 2X400W

* 2 Ohms WRMS Output @0.1THD : 4X200W

* Low Pass Filter : 40Hz-250Hz

* High Pass Filter : 40Hz-1KHz

* Frequency Response : 10-40000Hz

* Signal to Noise Ratio : 100dB

*stereo separation : >55dB

* Input Sensitivity : 145mV-2.4V

* Input Impedance : 10KOhms

* Operation Voltage : DC 12.4V

* Speaker Impedance @Stereo Driven : 4 Ohms

* Fuse Rating 25A x 2

* Dimensions (W x H x D)mm : 320 x 50 x 244

 

Features

* Ultra Stable PWM (pulse width modulated) mosfet power supply

* 2 Ohm Stable operation with output power increase

* Built-in Crossover top control

CH 1 / 2            : Variable Hi-pass filter (40Hz-1KHz)

Variable Low-pass Filter (40Hz-250Hz)

Variable Subsinic Filter (15Hz-40Hz)

* CH 3 / 4            : Variable Hi-pass filter (40Hz-1KHz)

Variable Low-pass Filter (40Hz-250Hz)

Variable Subsinic Filter (15Hz-40Hz)

* Tri-Mode Capability for simultaneous hook-up of two stereo Channels and subwoofer

* Crossover mode switch (hi-full-low)

* Wired Remote Control (optional 5meter volume wire)

* Soft-start delay turn-on circuit

* Automatic remote on/off switshing

* Power on and protect led indicators

* Thermal, overload, short, circuit, and DC oof-set protection

* transparent power and speaker terminal

* Line out RCA jack

PL 1800

Spesifications

* 4Ohms Maximum Output @0.03% THD : 1800W RMS/1Ohm

* 4 Ohms Bridged Mono Output @0.02% THD : 1200W RMS/2Ohm

* 2 Ohms WRMS Output @0.1THD : 600W RMS/4Ohm

* Low Pass Filter : 40Hz-250Hz

* Subsonic Filter : 15Hz-40hz/Subsonic

* Frequency Response : 20-500Hz

* Signal to Noise Ratio : 100dB

* Input Sensitivity : 150mV-2.5V

* Input Impedance : 10KOhms

* Operation Voltage : DC 14.4V

* Speaker Impedance @Stereo Driven : 1 Ohms

* Remote Control : Optional

* Fuse Rating 25A x 3

* Dimensions (W x H x D)mm : 320 x 63 x 236

 

Features

* Full Mosfet Class D Amplifier

* 2 Input/Mono Channel Output

* Low CUrrent Consumption

* Fully 1Ohm Stable Operation

* Two Speaker Operation

* RCA Line Out

* Transparent Power & Speaker Terminals

* Crossover Slope (24dB per Oct)

* Bass Boost Control

* Variable Subsonic Filter

* Variable Low Pass Filter

* Wired Remote Control

* Thermal, Overload, Shot Circuit And DC Off-Set Protection

PL 2400

Spesifications

* 4Ohms Maximum Output @0.03% THD : 1000W

* 4 Ohms Bridged Mono Output @0.02% THD : 2X500W

* 2 Ohms WRMS Output @0.1THD : 4X250W

* Low Pass Filter : 40Hz-250Hz

* High Pass Filter : 40Hz-1KHz

* Frequency Response : 10-40000Hz

* Signal to Noise Ratio : 100dB

*stereo separation : >55dB

* Input Sensitivity : 145mV-2.4V

* Input Impedance : 10KOhms

* Operation Voltage : DC 14.4V

* Speaker Impedance @Stereo Driven : 4 Ohms

* Fuse Rating 30A x 2

* Dimensions (W x H x D)mm : 350 x 50 x 244

 

Features 

* Ultra Stable PWM (pulse width modulated) mosfet power supply

* 2 Ohm Stable operation with output power increase

* Built-in Crossover top control

CH 1 / 2            : Variable Hi-pass filter (40Hz-1KHz)

Variable Low-pass Filter (40Hz-250Hz)

Variable Subsinic Filter (15Hz-40Hz)

* CH 3 / 4            : Variable Hi-pass filter (40Hz-1KHz)

Variable Low-pass Filter (40Hz-250Hz)

Variable Subsinic Filter (15Hz-40Hz)

* Tri-Mode Capability for simultaneous hook-up of two stereo Channels and subwoofer

* Crossover mode switch (hi-full-low)

* Wired Remote Control (optional 5meter volume wire)

* Soft-start delay turn-on circuit

* Automatic remote on/off switshing

* Power on and protect led indicators

* Thermal, overload, short, circuit, and DC oof-set protection

* transparent power and speaker terminal

* Line out RCA jack

PL 2500 D

Spesifications

 * 4Ohms Maximum Output @0.03% THD : 2200W RMS/1 Ohm

* 4 Ohms Bridged Mono Output @0.02% THD : 1500W RMS/2 Ohm

* 2 Ohms WRMS Output @0.1THD : 800W RMS/4Ohm

* Low Pass Filter : 40Hz-250Hz

* Subsonic Filter : 15Hz-40hz/Subsonic

* Frequency Response : 20-500Hz

* Signal to Noise Ratio : 100dB

* Input Sensitivity : 150mV-2.5V

* Input Impedance : 10KOhms

* Operation Voltage : DC 14.4V

* Speaker Impedance @Stereo Driven : 1 Ohms

* Remote Control : Optional

* Fuse Rating 30A x 3

* Dimensions (W x H x D)mm : 380 x 50 x 244

 

Features

* Full Mosfet Class D Amplifier

* 2 Input/Mono Channel Output

* Low CUrrent Consumption

* Fully 1Ohm Stable Operation

* Two Speaker Operation

* RCA Line Out

* Transparent Power & Speaker Terminals

* Crossover Slope (24dB per Oct)

* Bass Boost Control

* Variable Subsonic Filter

* Variable Low Pass Filter

* Wired Remote Control

* Thermal, Overload, Shot Circuit And DC Off-Set Protection

PL 2800 D

Spesifications

* 4Ohms Maximum Output @0.03% THD : 2400W RMS/1 Ohm

* 4 Ohms Bridged Mono Output @0.02% THD : 1700W RMS/2 Ohm

* 2 Ohms WRMS Output @0.1THD : 1000W RMS/4Ohm

* Low Pass Filter : 40Hz-250Hz

* Subsonic Filter : 15Hz-40hz/Subsonic

* Frequency Response : 20-500Hz

* Signal to Noise Ratio : 100dB

* Input Sensitivity : 150mV-2.5V

* Input Impedance : 10KOhms

* Operation Voltage : DC 14.4V

* Speaker Impedance @Stereo Driven : 1 Ohms

* Remote Control : Optional

* Fuse Rating 40A x 3

* Dimensions (W x H x D)mm : 420 x 50 x 244

 

Features

* Full Mosfet Class D Amplifier

* 2 Input/Mono Channel Output

* Low CUrrent Consumption

* Fully 1Ohm Stable Operation

* Two Speaker Operation

* RCA Line Out

* Transparent Power & Speaker Terminals

* Crossover Slope (24dB per Oct)

* Bass Boost Control

* Variable Subsonic Filter

* Variable Low Pass Filter

* Wired Remote Control

* Thermal, Overload, Shot Circuit And DC Off-Set Protection